|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Data Sheet 3.0 FMS2014-001 High Power GaAs SPDT Switch Features: Functional Schematic 3x3x0.9mm Packaged pHEMT Switch Excellent low control voltage performance Excellent harmonic performance under GSM/DCS/PCS/EDGE power levels Very high Tx-Rx isolation: >28dB typ. at 1.8GHz Very low Insertion loss: 0.5dB at 1.8GHz Very low control current RoHS compliant ANT V1 V2 RF1 RF2 Description and Applications: The FMS2014-001 is a low loss, high power and linear single pole double throw Gallium Arsenide antenna switch designed for use in mobile handset applications. The die is fabricated using the Filtronic FL05 0.5m switch process technology, which offers excellent performance optimised for switch applications. The FMS2014-001 is designed for use in dual/tri and quad band GSM handset antenna switch modules and RF front-end modules. It can also find use in other applications where high power and linear RF switching is necessary. Electrical Specifications: Parameter Insertion Loss (TAMBIENT = 25C,Vctrl = 0V/2.5V, ZIN = ZOUT = 50) Test Conditions 0.5 - 1.0 GHz 1.0 - 2.0 GHz Min Typ 0.45 0.5 Max 0.5 0.55 Units dB dB dB dB dB dBc dBc dBc dBc s Return Loss Isolation 0.5 - 2.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 16 -30 -26 -60 -65 -60 -65 20 -32 -30 -70 -75 -70 -75 2nd Harmonic Level 1 GHz, Pin = +35 dBm, 100% Duty Cycle 2 GHz, Pin = +33 dBm, 100% Duty Cycle 3rd Harmonic Level 1 GHz, Pin = +35 dBm, 100% Duty Cycle 2 GHz, Pin = +33 dBm, 100% Duty Cycle Switching speed : Trise, Tfall Ton, Toff Control Current 10% to 90% RF and 90% to 10% RF <0.3 50% control to 90% RF and 50% control to 10% RF +35dBm RF input @1GHz 5 10 1.0 s A Note: External DC blocking capacitors are required on all RF ports (typ: 100pF) 1 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com Data Sheet 3.0 FMS2014-001 Absolute Maximum Ratings: Parameter Max Input Power Control Voltage Operating Temp Storage Temp Symbol Pin V ctrl T oper T stor Absolute Maximum +38dBm +5V -40C to +100C -55C to +150C Note: Exceeding any one of these absolute maximum ratings may cause permanent damage to the device. Truth Table: Switch State (A) (B) VC1 HIGH LOW VC2 LOW HIGH ANT- RF1 Insertion Loss Isolation ANT- RF2 Isolation Insertion Loss General Test Conditions: LOW = 0V to 0.2V Bias Voltages HIGH +2.5V to +5V Port Impedances Off arm termination 50 50 2 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com Data Sheet 3.0 FMS2014-001 Typical Measured Performance on Evaluation Board (De-Embedded): (Measurement Conditions VCTRL = 2.5V (high) & 0V (low), TAMBIENT = 25C unless otherwise stated) FMS2014QFN INSERTION LOSS 0 -0.1 -0.2 -0.3 -0.4 dB -0.5 -0.6 -0.7 -0.8 -0.9 -1 0.5 1 1.5 2 Frequency (GHz) 2.5 3 FMS 2014QFN ISOLATION -20 -22.5 -25 dB -27.5 -30 -32.5 -35 0.5 1 1.5 2 Frequency (GHz) 2.5 3 FMS2014QFN RETURN LOSS 0 -5 -10 -15 dB -20 -25 -30 -35 -40 0.5 1 1.5 2 Frequency (GHz) 2.5 3 3 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com Data Sheet 3.0 FMS2014-001 Pad Layout: V1 ANT V2 Pin Number 1 Description N/C N/C RF1 N/C N/C N/C RF2 N/C N/C V2 ANT RF V1 Pin 1 12 11 10 9 2 3 4 2 RF1 3 4 5 6 8 7 RF2 5 6 7 8 9 10 11 *View from the top of the package 12 QFN 12 Lead 3*3 Package Outline: 4 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com Preliminary Data Sheet 3.0 FMS2014QFN Evaluation Board: BOM C7 C6 C1,C2,C7 Capacitor, 100pF, 0402 Capacitor, 47pF, 0402 Label C3,C4 Component Capacitor, 470pF, 0603 C5 C1 C2 C5,C6 C3 C4 Preferred evaluation board material is 0.25 mm thick BOARD ROGERS RT4350. All RF tracks should be 50 ohm characteristic impedance. Evaluation Board De-Embedding Data (Measured): FMS2014QFN CAL BOARD INSERTION LOSS 0 -0.1 -0.2 -0.3 -0.4 dB -0.5 -0.6 -0.7 -0.8 -0.9 -1 0.5 1 1.5 2 Frequency (GHz) 2.5 3 5 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com Preliminary Data Sheet 3.0 FMS2014QFN Tape & Reel Specification: Tape Dimensions Perforation Description Diameter Pitch Position Symbol D0 P0 E1 A0 B0 K Size (mm) 1.5 0.1 4.0 0.1 1.75 0.1 3.3 0.1 3.3 0.1 1.1 0.1 Cavity Length Width Depth Distance between centre lines Cavity to Perforation (length direction) P2 2.0 0.1 Cavity to Perforation (width direction) Carrier tape Width F 5.5 0.1 W 12 0.3 6 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com Preliminary Data Sheet 3.0 FMS2014QFN Preferred Assembly Instructions: Available on request. Disclaimers: This product is not designed for use in any space based or life sustaining/supporting equipment. Handling Precautions: To avoid damage to the devices care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 1A (250-500 V) as defined in JEDEC Standard No. 22-A114. Further information on ESD control measures can be found in MIL-STD-1686 and MILHDBK-263. Application Notes & Design Data: Application Notes and design data, including S-parameters, are available on request. Disclaimers: This product is not designed for use in any space based or life sustaining/supporting equipment. Ordering Information: Part Number FMS2014-001-TR Tape & Reel (minimum quantity: 1k pcs) FMS2014-001-TB FMS2014-001-EB Packaged Die supplied in a Tube Packaged Die mounted on Evaluation Board Description Packaged Die 7 Preliminary specifications subject to change without notice Filtronic Compound Semiconductors Ltd Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: sales@filcs.com Contact Details (USA): Tel: +1 (408) 850 5790 Fax: +1 (408) 850 5766 Email: sales@filcsi.com Website: www.filtronic.com |
Price & Availability of FMS2014-001-TB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |